Standard Features:
  • Venturi Style Manual Balance Valve with Memory Stop and Pressure/Temperature Ports
  • Ball Valve with Pressure/Temperature Ports and Union End
  • FSWT Coil Fittings with Pressure/Temperature Ports
  • Lever Handle
  • Cv's: 2.30, 5.40, 9.20, 20.0
  • Package Shrink Wrapped on Skin Board (Hard Pipe & Flexible Packages up to 3/4" and Flex Packages using hose lengths up to 24" will be shrink wrapped on skin board. Other sizes are too large and heavy for the board.)
Unit of Measure

Specifications

Type

N/A Manual

Configuration

N/A 2 Way-Hard Pipe

Size

N/A 1 in

Flow Rate

N/A 1.6 to 44.7 gpm0.50 to 5.0 psid

Control Valve Type

N/A 2 Wire-Zone Valve-Spring Return

Max. ATC Flow (MAF): Calculated Using Valve Cv @ ΔP of 9

N/A 10 gpm (for Size - 1/2 in) 10 gpm (for Size - 3/4 in) 15 gpm (for Size - 3/4 in) (NC - Normally Closed) 24 gpm (for Size - 1 in) 24 gpm (for Size - 3/4 in) 3 gpm (for Size - 1/2 in) 7 gpm (for Size - 1/2 in)

Max. ATC Close Off Pressure

N/A 10 psi (for Size - 1 in) 10 psi (for Size - 3/4 in) 15 psi (for Size - 3/4 in) (NC - Normally Closed) 20 psi (for Size - 1/2 in) 20 psi (for Size - 3/4 in) 30 psi (for Size - 1/2 in) 50 psi (for Size - 1/2 in)

Max. Recommended Flow (MRF): Calculated @ 7 ft/sec. or Max. Valve Flow Rate

N/A 20 gpm (for Size - 1 in)

Noise Sensitive Applications (NSA) Calculated @ 4 ft/sec. or Max. Valve Flow Rate

N/A 9 gpm (for Size - 1 in)

Specification No.

N/A MBPP-SPEC-2PM3-005

Dimension A

N/A 5.43 in138 mm

Options

N/A Hays Supplied & Installed ATC: 1/2" - 1" - 2-Wire 120v, Normally Open-Normally Close Hays Supplied & Installed ATC: 1/2" - 1" - 2-Wire 24v, Normally Open-Normally Close Blowdown Valve with Hose Connector (Optional for Ball Valve) Customer Supplied - Hays Installed ATC Customer Supplied-Field Installed ATC Extended Pressure/Temperature Ports & Extended Handles Manual Air Vent on Return Side Coil Connection Short Handle (Available in 1/2" - 1" Only) Y-ball Strainer with Pressure/Temperature Port & Blowdown Valve w/Hose Connector (Replaces Ball Valve with Pressure Temperature Ports)