Specifications:
- Mesurmeter with Pressure/Temperature Ports for Flow Verification
- Inlet: FNPT
- Outlet: MNPT
- Preset Non-Removable Venturi Inserts
- Cv’S: 1/2": 0.23, 0.46, 0.87, 1.8, 3.3, 5.4
- 3/4": 0.55, 1.1, 2.2, 4.0, 6.7
1": 2.3, 5.4, 9.2, 20
1-1/4": 5.5, 9.8, 20, 24
1-1/2": 14, 19, 44
2": 13, 34, 56
- To verify flow, record the differential pressure reading which is the difference between the reading taken on the Hi Port and the Low Port of the Mesurmeter.
- Use corresponding pressure drop chart for Mesurmeter size and Cv to determine actual flow
- For High concentrations of antifreeze compounds, consult Hays Tech Tip on Propylene Glycol.
Unit of Measure
Specifications
Size |
N/A 1 in1/2 in1-1/2 in1-1/4 in2 in3/4 in |
Type |
N/A Hays Mesurmeter for Flow Verification |
Flow Rate |
N/A 0.20 to 12.1 gpm (0.50 to 5.0 PSID) (for Size - 1/2 in) 0.4 to 15.0 gpm (0.50 to 5.0 PSID) (for Size - 3/4 in) 1.6 to 44.7 gpm (0.50 to 5.0 PSID) (for Size - 1 in) 3.9 to 53.7 gpm (0.50 to 5.0 PSID) (for Size - 1-1/4 in) 9.2 to 125.2 gpm (0.50 to 5.0 PSID) (for Size - 2 in) 9.9 to 98.4 gpm (0.50 to 5.0 PSID) (for Size - 1-1/2 in) |
Inlet Connections |
N/A FNPT |
Outlet Connections |
N/A MNPT |
Overall Length |
N/A 1.9 in (for Size - 1/2 in) 1.9 in (for Size - 3/4 in) 2.14 in (for Size - 1 in) 2.64 in (for Size - 1-1/4 in) 2.89 in (for Size - 1-1/2 in) 3.67 in (for Size - 2 in) 48.3 mm (for Size - 1/2 in) 48.3 mm (for Size - 3/4 in) 54.4 mm (for Size - 1 in) 67.1 mm (for Size - 1-1/4 in) 73.4 mm (for Size - 1-1/2 in) 93.22 mm (for Size - 2 in) |
Specification No. |
N/A MBV-SPEC-MV8-004 |
Options |
N/A Stainless Steel Tag-Chain Upon Request |