Call: (800) 354 - 4297Email
Standard Features:
  • FNPT, FSWT, MSWT and MNPT Outlet / Inlet Connections
  • Changeable GPM Flow Cartridges
  • Differential Operating Pressure: At low differential pressure the flow area required to achieve higher flow exceeds the flow area available for the respective Series. Therefore, the minimum pressure differential requirement is increased for the higher flow ranges of some series Mesurflo valves.
  • ± 10% Accuracy
  • Operating Temperature Range 32ºF to 225ºF
  • 1/4" Pressure / Temperature Ports
  • Valves Labeled with Model No., Size & Flow Rate
  • Inlet and Outlet Port Options
  • Dryseal Pipe Threads
  • Weighs between 1.2 - 1.5 lbs. without the actuator (Refer to Components Section for specifications on ATC6, ATC7, and ATC8.)
  • Valve Body Suitable for 600 PSIG
  • Cycle Life of Ball Valve Greater than 100,000 Full Cycles
  • Torque Less Than 10 in. lbs.@300 PSID
  • Equal Percentage Characterized Disc Included
Unit of Measure

Specifications

Name

N/A Mesurflo®

Type

N/A Y-Ball Automatic Balancing Valve (Use w/Pop-Top Actuator)

Valve Style

N/A Y-Ball

Inlet Size

N/A 1/2 in3/4 in

Outlet Size

N/A 1/2 in3/4 in

Flow Rate

N/A 0.50 to 5.0 gpm

Inlet Connections

N/A FNPT FSWT MNPT MSWT

Outlet Connections

N/A FNPT FSWT MNPT MSWT

Operating Temperature Range

N/A 32 to 225 ºF

Weight

N/A 1.2 to 1.5 lb

Specification No.

N/A ABV-SPEC-2528-004

Options

N/A Extended Pressure/Temperature Ports Plugged (Ports Machined w/1/4" Plug) Pressure Taps Stainless Steel Tag-Chain Upon Request

Material Specifications

Valve Body

N/A Brass

Short Handle (Standard)

N/A Brass

Ball

N/A Stainless Steel

Pressure / Temperature Ports

N/A Brass

O-Rings

N/A EPDM

Ball Seat

N/A PTFE

Stem Material

N/A Stainless Steel

End Cap

N/A Brass

Diaphragm

N/A EPDM

Ball Valve End Fitting

N/A Brass

Orifice

N/A Polyphenylsulfone